Over/Under-runs - Over-runs or under-runs will not exceed 5%. If a job is short, InspectUSA.com will provide a store credit toward any
future purchases equal to the amount of the under-run. In the event of an over-run, the customer agrees to provide payment
for the amount of the extra merchandise.
Artwork Proof - InspectUSA.com staff will work closely with the customer to ensure accuracy of the final printed products.
For every custom imprinted job, a .pdf proof of the final artwork will be eMailed to the customer prior to printing. Customer must send eMail approval and acceptance of the proof within two business days of receipt.
Customer accepts all responsibility for the accuracy of the final proof and acknowledges that InspectUSA.com bears no responsibility for any errors
contained in the customer approved final proof or the resulting printed products.
Custom Imprinted Carbon Monoxide Detectors
Typical imprinting subject matter includes a logo or printed company name, web address and/or phone number. Other text may substiuted
according to sizing requirements shown below.
Only the front of the detector may be imprinted as the obverse side contains user instructions.
Logo images and artwork must have a resolution of 300 dots per inch and be in either .jpg, .eps or .cdr format.
Maximum logo size is 590 pixels x 195 pixels.
Text will be printed using the Arial Narrow font and may be no smaller than 9 point.
Maximum length of a line of text is 595 pixels.
The following colors are standard on the detector:
Gray - The color of the box used to record the opening date of the detector.
Orange - The color of the ring around the silica sensor.
These colors may be used in your logo or text along with up to two additional colors (for a total of four colors)
from the Pantone or CMYK palettes.
